›
JGAurora A5S on Sale at Amazon USA - $339, with $60 off!
JGMaker Magic on Sale for $208, with $20 instant discount coupon!.

Nozzle to much down need setup help

childxchildx Posts: 2Member
in JGMaker Magic
After I have build the printer and press auto home the printer nozzle is more down then the ground is that normal an how can I fix it?

I also have tried to move the ground more down but that don't work and I don't know how I can set the ground that the printer know how he must stop my fear if I print now that the nuzzle crashes in the ground. Please help me.



Comments

  • Samuel PinchesSamuel Pinches Posts: 2,836Administrator
    edited October 2020
    Hello, welcome @childx there are two options:
    • tighten the bed levelling thumb screws
    • raise the z-axis endstop switch: unscrew it, and then screw it into the frame at a higher position.
    Do you understand my suggestions?
    Post edited by Samuel Pinches on
  • childxchildx Posts: 2Member
    If I understand right I must put this one more up?


    And this are the screws? I already tried to change them but the nozzle never cames over the ground.



    And if I look on a YouTube video the nozzle from another one is like the same level like the white part next to the nozzle. can I change the height of the nozzle on my printer and if yes how can I do this?


  • Samuel PinchesSamuel Pinches Posts: 2,836Administrator
    Yes -- you understand exactly, first photo is correct. I don't think you need to change anything else.
Sign In or Register to comment.