Small milestone - we passed 300,000 pageviews on the forum today (16th Sept)! 😁 P.S if you are not aware we're running a competition in the facebook group. Head over here to enter, if you haven't already! Ends Sun 22nd Sept!

JGAURORA JGMaker Magic Promotion

NEW Budget 3D Printer: JGMaker Magic
The best deal at the moment is from Gearbest, who are running a flash sale for just $179!
Amazon USA also is offering an $30 instant discount coupon on the JGAurora Magic - a great option for those who want it even faster!


[6th Jun 19] The LATEST JGAurora A5S is already for sale under $400 - use coupon GBA5S11 for a further $15 off!
Print quality is better than A5 out of the box, and it only takes 10 minutes to assemble.
Click here to check out this deal!

A3 anti-interference cable

the video with  assembly instructions for the A3 show nothing about the Conexion of the anti-interference cables. I suppose that they should be conected (both )to the negative pole  of the power input  on the PC board. Can anybody confirm that?


  • Samuel PinchesSamuel Pinches Posts: 2,060Administrator
    edited April 9
    They should be connected to any Ground point. This could be wedged into a screw mounting on the motherboard, soldered to the top of the metal USB heater socket, or a ground connection on the power supply. If you have a multimeter you can check continuity between the ground pin on the mains power cable, and anywhere on the frame. 
    Post edited by Samuel Pinches on
  • mufasa48mufasa48 Posts: 3Member
    Thank you Sam.!

Sign In or Register to comment.