First Print with JGMaker Magic

HaimZHaimZ Posts: 1Member
Hello Guys,

I just printed my first model with the JGMaker Magic and PLA,
on a mirror surface.
  • Printing Temperature: 200 °C
  • Bed Temperature: 60 °C
  • Speed: 50 mm/s
  • Layer height: 0.15 mm
  • Infill: 20%
  • Initial Layer Speed: 20 mm/s

One of the corners and it's side rib came out not as even as the other three.
What do you think can cause this?

Thanks in advance,
Haim


Sign In or Register to comment.